Well there goes my future children's college fund.I’ve read somewhere that they are welded together so you will need to still do a swap.
Sponsored
Well there goes my future children's college fund.I’ve read somewhere that they are welded together so you will need to still do a swap.
Looks amazing! How/where did you find all of the upgrades? - Sasquatch Wheels/Tires, running boards etc?!Hey Guys,
I've been waiting for our Bronco to get built for 16 months and we finally took delivery Tuesday 2/21/23. Once I received my VIN back in Nov I started researching what I was going to do to it and started searching for parts. I ended up landing on a FakeSquatch since the wheels/tires and suspension were readily available and cheap, this Bronco will end up being my youngest sons in a year so keeping it CHEAP on the build.
Here's what it looked like when we brought it home 3 days ago, I was actually surprised how bad the steelies looked with those small tires so we got right after the build.
Day 2 and 3 we added the below list of parts:
- Factory Running Boards
- White Bronco Letters
- Stubby Antenna
- Husky liners front and rear
- Nylon Grab Handles
- Sasquatch Shocks
- Sasquatch Wheels/Tires
- Rough Country Level kit front, just the 2 round shims per side.
- Rough Country Level kit rear, just the 2 round shims per side.
- Modular Bumper with Bull bar
- Metal Skid plate
Here's today after these mods
Had windows tinted 20% today and I did a full Graphene ceramic coat and installed the BD lights yesterday.
Still on the list to get done:
- Window tint all around 20%
- Front mud flaps
- Get the deleted Sub working, probably a Kicker shallow 8 and Amp
- Once Sub is working figure out what speakers need to be upgraded to keep up
- Sound deadening
- Baja Designs XL80's at the pillar location
- Some kind of mod bumper pocket fog lights
- Watching for some seat covers, Mabett or OEM take offs
- Looking for a solid Vinyl bikini top(not mesh), looks like nobody makes one yet.
- Upgrade Gearing to 4.7 or higher
- Truetrac or ARB air locker in rear once I figure out how to upgrade gearing
All of the Ford parts like Sasquatch stuff and boards were from Craigslist and Facebook. Once I got my VIN I started watching daily for deals.Looks amazing! How/where did you find all of the upgrades? - Sasquatch Wheels/Tires, running boards etc?!
Installed the CURT Tow Receiver and Wire Harness yesterday, was kind of a spiderweb of wires to cram in that little area in behind the drivers tail light. Also added a HD Electrical Connector so I didn't have the trailer wires hanging.
Had some extra time after tow install so started the Sub Install by pulling the side panel and sub box out. I did have the empty AMP with RED X and no magnet Sub.
To fit the Kicker sub in the OEM box I will need to trim off about a half inch circle, the Kicker is WAY beefer than the OEM.
Not done yet, I'm biting off small pieces at a time, started 2 days ago. Yes the kicker has plenty of room with like 1.5 - 2 inches clearance behind the magnet.How did this sub install go?
Was the OEM box deep enough for the Kicker Sub?
Other than minor trim on the opening, pretty much plug-n-play?
I have the B&O system in my 2-Door. The Sub Box and the AMP are completely different than what you have. The Kicker 8" Subwoofer almost dropped right into place. The one corner near the AMP was trimmed and bingo!Installed the CURT Tow Receiver and Wire Harness yesterday, was kind of a spiderweb of wires to cram in that little area in behind the drivers tail light. Also added a HD Electrical Connector so I didn't have the trailer wires hanging.
Had some extra time after tow install so started the Sub Install by pulling the side panel and sub box out. I did have the empty AMP with RED X and no magnet Sub.
To fit the Kicker sub in the OEM box I will need to trim off about a half inch circle, the Kicker is WAY beefer than the OEM.
Can you let me know how you got them white? We havent been able ot figure it out on the app, weve been keeping ours yellow like a raptor's lookMorimoto XRGB lights installed, after playing with the happy lighting app I think I finally have the white running light color I want. The low and High beams are excellent compared to the stockers. This is an upgrade anybody wanting more light should do, it was only $525 after trade in and forum discount!