Auto S/S disabled (and greyed out) but still operational

[darinhouston]

I have a 2023 Ford Bronco Badlands and my entry seems to have succeeded but the feature is still operational. The display does show a greyed out A with the slash through it as though it is disabled, but when I come to a stop it still shuts off.

Any thoughts? Here is my entry...

PSCM 730-03-01 xxxx xxxx 00--

Sponsored

 

[darinhouston]

Turns out that even the greyed out symbol disappeared after a few start/stop cycles.

 

[Fly]

Try reverting back to as-built configuration, drive around a bit and then try the Forscan mod again?

 

[Mikesmallcrawler21]

Turns out that even the greyed out symbol disappeared after a few start/stop cycles.

Mine did the same thing when it was new... upto about 150.miles... .it was grayed out, and slashed thru... I thought maybe ford deleted it to save a chip, like they have done with the 2023 F150s...... but now, unfortunately the stop start works as designed.... haha

 

[cbrenthus]

To clarify, you tried disabling s/s with Forscan, and it didn't work? If so, I'd go back to as-builts and drive around a few days, then try again.

 

[darinhouston]

Yes, that's right - I guess I'll try that.

 

[Mlarv]

I have the same issue with mine. I disabled it with Forscan, and it did not work. The A.S.S. still shuts the engine off at stop lights. I will try reverting back to As Built for a few days and give it another shot.

Sponsored