Bronco Team 2 door.

[Arokcrwlr]

If you end up not having the upfitter wiring under the hood and need to buy/install the factory switches, it's worth looking at other options like the SwitchPros SP9100 instead. IMO, it's an easier install than retrofitting the factory upfitters and will make wiring your lights a simpler process. Plus, it comes with additional functionality that the factory switches don't have.

In my case, the Baja Designs LP6's on the bumper have a high and low mode; each mode is on a separate switch. If both are enabled at the same time the light can be damaged, but the SP9100 can be programmed to turn off the high or low mode switch when the other one is enabled. You can buy a separate $100 harness from Baja Designs that does the same thing, but it's expensive and install is not as tidy.

Also, SDHQ makes a bracket for the SwitchPros Power Module that mounts in the inner fender behind the fuse box and keeps everything nice and neat.

Nice! Could that bracket be used to mount other things - like a fuse block?

Sponsored

 

[CC1999]

Here is my 2 door.

 

[Bikeric]

Does anyone have a picture of the adjustment controls of the vinyl drivers seat on a 2 door? I'd like to know if it has lumbar support.

2-Door with Manual Vinyl Seats has Adjustable Lumbar Support.

 

[nwGTS]

Looks terrific! I see recovery boards but dont see a dedicated rack... just the OEM crossbars. How are you mounting them to your rig? I'm having this dilemma right now.

 

[carmigo]

I wanted to start this thread because I'm tired of 4 doors getting all the love. I still love you Team 4 door but I love the 2 doors just a little bit more. I don't have mine yet so obviously I can't post any pictures. If you have a 2 door or any cool pictures of this infamous unicorn then I guess put it in here. Something about a 2 door bronco just hits for me.
Edited: took delivery about a week and a half ago(11/19/21). Finally I get to show it off in this thread. The hype is real…

Not often I get to see a two-door. It looks great (100% team 2-door)

 

[Yamapro]

Looks terrific! I see recovery boards but dont see a dedicated rack... just the OEM crossbars. How are you mounting them to your rig? I'm having this dilemma right now.

Mounting plate made by a company called Kaon, out of Australia.

 

[Johnny Rebel]

Nice! Could that bracket be used to mount other things - like a fuse block?

I don't see why not as long as the fuse block fits in that space. Great idea!

 

[Karl_in_Chicago]

2-Door with Manual Vinyl Seats has Adjustable Lumbar Support.

. . . but on driver's side only I think?

 

[Toccoa]

. . . but on driver's side only I think?

Correct.

 

[RoLyMa27]

Now don't you worry, kept my mother on speed dial the entire time and double-rubbers on each thumb, but we done took the coupé out to stretch the legs and bash some skid plates in Moab then low and behold, the coupé outnumbered the more-doors!

The beauty of a reflection shot right back in yer eyes from one 2-door to another. The Erection Green erupting in the darker regions of the nearly black hole of Antimatter Black!

Every chick in sight was dancing and singing our praise to the 2-door Rock Gods!

@talbot @broadicustomworks

Be careful Rick, all that 2 dr Bronco porn, you might "lift me up"

 

[Broncotrax]

Starting to dig everyone’s takes on the 2 tones from the 80’s-90’s. My daughter spotted this one in Jupiter last week

 

[CC1999]

Wow, that two tone really looks AWESOME!!!!

 

[Broncotrax]

Wow, that two tone really looks AWESOME!!!!

Thanks! I wanted it similar to my '94

 

[PuckettBuckett]

A couple of two doors in their natural habitat…the parking lot at work

 

[BroncoNapped]

Finally got my iconic silver 2 door base Mansquatch yesterday. Loving it so far. Only problem is they forgot my up fitter switches . Other than that and not fitting in the garage with the roof rack I love it. Did a little mock of what it’s gonna look like with new wheels/tire combo and I think it’s gonna look sweet.

Yeah, my switches were missing too. They were on my build sheet, but they didn't install them. thanks ford!

Sponsored