Eibach Pro Lift Kit for the 2021+ Ford Bronco (Sasquatch Package)

[SROC3]

Got my springs installed today. 2022 Wildtrack. 1” wheel spacers. Otherwise stock suspension (plus springs now).

I echo what others have said. Slightly better ride from stock. Excellent look and feel on the road. Very pleased overall. Will be adding 37’s eventually. Plenty of room for it.

Which spacers did you get? Looks great man!!!! - Also, no clanking or any noises right?

Sponsored

 

[FairPlayInc]

Which spacers did you get? Looks great man!!!! - Also, no clanking or any noises right?

I got these - https://www.mishimoto.com/borne-off...nl6lBY-gPKHanbrgEcozQGEbDb3PLcRBoCpFUQAvD_BwE

They are the Borne-Off-road 1” spacers in Black.

Thank you for the kind words!

No clunking, squeaking or creaking. Knock on wood.

 

[SROC3]

I got these - https://www.mishimoto.com/borne-off...nl6lBY-gPKHanbrgEcozQGEbDb3PLcRBoCpFUQAvD_BwE

They are the Borne-Off-road 1” spacers in Black.

Thank you for the kind words!

No clunking, squeaking or creaking. Knock on wood.

Thanks you so much - you pretty much sealed the deal for me on getting these

 

[smhenry]

I was quoted 3. They charged me for 4. Which isn’t bad. Should be 3, but when I saw the Bronco, I didn’t even care.

Much appreciation.

 

[SROC3]

To catch you up on the last page or so of posts:

on 35's, just Eibach springs (removed spacer leveling lift that was installed before installing Eibach Springs), Stock Sasquatch with "Capable" Front Bumper.

Ride quality is better to me than Stock Sas Suspension with 1" spacer lift, no noticeable brake dive yet, eats up small bumps and holes in the road with less noise, I had been starting to complain a bit lately about the cabin creaks and noises due to the roads around here and that seems to be fixed so far or at least much more minimal in disturbance, No clanking or creaking coming from the suspension that I can hear, I did have some creaks and a few slight clanks with the spacer lift.

Hope this helps!!

Thanks man it does! I will be ordering mine tomorrow as a result Also, do you have any spacers in those pics? Or stock?

 

[1IH]

Thanks man it does! I will be ordering mine tomorrow as a result Also, do you have any spacers in those pics? Or stock?

You’re welcome. No wheel spacers, but I swapped Sas flares for standard ones. I prefer to keep a narrower profile right now, the other wheels I had for a year were about 1 ¼ to 1 ½ outside the Sas flares. These are about the same outside stock flares.

 

[SROC3]

You’re welcome. No wheel spacers, but I swapped Sas flares for standard ones. I prefer to keep a narrower profile right now, the other wheels I had for a year were about 1 ¼ to 1 ½ outside the Sas flares. These are about the same outside stock flares.

Interesting - I guess a good alternative to using spacers How much were the standard (non-SAS) flares?

 

[yokayyb]

So what’s the final verdict on these for a unmodded/loaded Sasquatch? I’m mainly just going to overland and wonder off trails no hardcore crawling sticking with 35s.

 

[FairPlayInc]

So what’s the final verdict on these for a unmodded/loaded Sasquatch? I’m mainly just going to overland and wonder off trails no hardcore crawling sticking with 35s.

I love the look and ride of mine. There is still a slight rake (40" - front and 40.5" rear -, measured from ground to fender). I would suspect that a fully packed rig for overlanding would level out nicely.

 

[Bronco#2]

I ordered mine and should get them in next week. This seems like a much better alternative to the perch collars or puck spacers. I was able to get mine for $337 delivered.

 

[Brute4]

Received my springs. Unfortunately my delivery of my BadSas has been pushed backed twice since the Oct 3rd shipment date. Now scheduled for delivery by the 24th. Going to mount 37s with RRW 17x8.5 with 0 offset with Mickey Thompson Baja legend MTZ immediately after installing springs. I‘lol take before and after measurements as soon as completed.

 

[yokayyb]

I love the look and ride of mine. There is still a slight rake (40" - front and 40.5" rear -, measured from ground to fender). I would suspect that a fully packed rig for overlanding would level out nicely.

I do overland so having a slight Rake is ideal for me. Thank you for the response! Now time to research why everyone is having a hard time doing the front suspension. I’ve done a fair share amount of Coilover and springs job.

 

[KompressorV12]

Got my springs installed today. 2022 Wildtrack. 1” wheel spacers. Otherwise stock suspension (plus springs now).

I echo what others have said. Slightly better ride from stock. Excellent look and feel on the road. Very pleased overall. Will be adding 37’s eventually. Plenty of room for it.

Do you have the factory
steel bash plates?

 

[FairPlayInc]

Do you have the factory
steel bash plates?

Yes I do.

 

[KompressorV12]

Yes I do.

Anymore pics? I’m a pics junkie I’ll take as many as I can get with the new springs installed

Sponsored