Hood Deflector with LED lights from AVS Auto Vent Shade - installed pics

[Jaymanire]

Does anyone have experience installing the AVS Aeroskin Lightshield Pro Hood Shield? Specifically, looking for guidance on how to connect the light bar to the parking and signal lights. Is there way to do it via the fuse box? I really do not want to pop off the grill and headlamp assembly to tap the harness wiring, like others have done for the “raptor” grill lights and LED letters from Oracle. Plus, I’m not sure the length of the included wiring will reach back to the front. I also do not want to wire to an auxiliary switch. It should come on with the parking lights and the sequence triggered with the signal lights. What am I missing?

https://www.autoventshade.com/produ...9VAQtUg-14UGF_ATGHpDX9UW9sr9boDcaAlsPEALw_wcB

Sponsored

 

[bigblueboing]

What I want to know if this helps deflect rocks from your windshield.

 

[bigblueboing]

That looks really cool and you just have to tap the parking lights somewhere.

 

[bigblueboing]

Instructions say you got four wires. Right turn. Left turn hazard and ground. And it looks like it comes with connectors! Wow I’m gonna get that shit forget the raptor lights

 

[kbBronco]

Very cool add-on! Best of luck getting it going. I’m putting an order in for one of these & I’ll report back!

 

[NM_21Bronco]

I just created a thread asking about these today. Keep us posted on how it goes! Can you post a few picture from farther away. Looks good!

 

[A10Warthog]

 

[ATLBronco75]

Night pics?

 

[Jaymanire]

Touché

 

[FastAndLight]

If this isn't an option, there is no way I'd get it.

 

[RescueCheckPT2]

If this isn't an option, there is no way I'd get it.

110%

 

[Mean Red GT]

Here is a video about them on a different truck but it DOES do somewhat of a Knight Rider thing when turned on.

 

[Tdifonzo]

Does anyone have experience installing the AVS Aeroskin Lightshield Pro Hood Shield? Specifically, looking for guidance on how to connect the light bar to the parking and signal lights. Is there way to do it via the fuse box? I really do not want to pop off the grill and headlamp assembly to tap the harness wiring, like others have done for the “raptor” grill lights and LED letters from Oracle. Plus, I’m not sure the length of the included wiring will reach back to the front. I also do not want to wire to an auxiliary switch. It should come on with the parking lights and the sequence triggered with the signal lights. What am I missing?

https://www.autoventshade.com/produ...9VAQtUg-14UGF_ATGHpDX9UW9sr9boDcaAlsPEALw_wcB

Did you ever figure this out? I'm stuck at the same spot.

 

[shawn6107]

Did you ever figure this out? I'm stuck at the same spot.

This might help
https://www.bronco6g.com/forum/thre...king-lights-for-backlighting-basic-diy.42999/

 

[Jaymanire]

Sponsored