- First Name
- Mike
- Joined
- Dec 8, 2021
- Threads
- 36
- Messages
- 279
- Reaction score
- 254
- Location
- Ormond Beach, FL
- Website
- www.mikedelninno.com
- Vehicle(s)
- 2005 Ford Explorer
- Your Bronco Model
- Outer Banks
- Thread starter
- #1
Getting ready to tackle full audio upgrade using all I've learned from forum. Special shout out to @RagnarKon @cmcbronco @Ksjrb03 to name just a few for all their information and assistance.
Just a few final questions.
1. I'm using the PlugnPlay 19-1 and will be unspooling the blue turn on lead wire from the harness to the Kicker 500.1. However, I'd like to wire this to an AUX switch as well. Any photos of vids on how I would do this and to which switch? Do I split turn on lead, run from under hood, etc?
2. I've got Forscan, but am curious. When you run the Kicker Tone Technology, does it supersede the Forescan settings, or do I still need to adjust (at very least 0 EQ)?
Thanks for the help.
Just a few final questions.
1. I'm using the PlugnPlay 19-1 and will be unspooling the blue turn on lead wire from the harness to the Kicker 500.1. However, I'd like to wire this to an AUX switch as well. Any photos of vids on how I would do this and to which switch? Do I split turn on lead, run from under hood, etc?
2. I've got Forscan, but am curious. When you run the Kicker Tone Technology, does it supersede the Forescan settings, or do I still need to adjust (at very least 0 EQ)?
Thanks for the help.
Sponsored