Looking for photos with the 1.5” body lift

[br.jonathan]

No other suspension mods needed but I did need the JKS max tire kit

Thanka
Already recieved JKS kit not installed yet and waiting the body lift to be shipped on saturday

Sponsored

 

[Bird Dog Off Road]

I cant unsee the gaps between the bumper and the body. I thought body lifts were things of the past?

I ended up doing a 0.5” DIY body lift and love it. Gap increase isn’t really noticeable. If I was doing it over, I’d probably do a 3/4” body lift instead Just to get that little extra. For IFS vehicles, I think it’s a good way to not stress your front drivetrain geometry as much as the other type of lifts and still gain clearance.

 

[HarmCityHammer]

I ended up doing a 0.5” DIY body lift and love it. Gap increase isn’t really noticeable. If I was doing it over, I’d probably do a 3/4” body lift instead Just to get that little extra. For IFS vehicles, I think it’s a good way to not stress your front drivetrain geometry as much as the other type of lifts and still gain clearance.

Where might someone get a 3/4” kit?
any pics of your 1/2”?

 

[Bird Dog Off Road]

Where might someone get a 3/4” kit?
any pics of your 1/2”?

this thread has multiple people that have don’t the 3/4” body lift. Anything under 1.5” is a DIY job. Check out the links in my signature or go back sever pages in this thread and you’ll see plenty of photos.

 

[HeHateMe]

They may make something for the gap... Txbroncbuster posted something on Instagram... Pretty cool they added lights too.

Though theirs may be for a larger lift than 1.5 inch.

 

[HarmCityHammer]

this thread has multiple people that have don’t the 3/4” body lift. Anything under 1.5” is a DIY job. Check out the links in my signature or go back sever pages in this thread and you’ll see plenty of photos.

This thread is only showing two pages for me.
I’ll check out your sig

 

[HeliPilot]

I cant unsee the gaps between the bumper and the body. I thought body lifts were things of the past?

Right there with you. I did a Zone 3”. Took me a couple days to do, but I love it. The ride is surprisingly close to stock. And in some aspects, better than stock. It was worth my effort to not see the gaps.

 

[KompressorV12]

They may make something for the gap... Txbroncbuster posted something on Instagram... Pretty cool they added lights too.

Though theirs may be for a larger lift than 1.5 inch.

Wow that actually looks great

 

[Bird Dog Off Road]

This thread is only showing two pages for me.
I’ll check out your sig

My bad, got this thread confused with one of the others. Look in this one: https://www.bronco6g.com/forum/threads/thoughts-on-body-lifts-with-the-broncos-ifs.40870/

 

[Bird Dog Off Road]

Right there with you. I did a Zone 3”. Took me a couple days to do, but I love it. The ride is surprisingly close to stock. And in some aspects, better than stock. It was worth my effort to not see the gaps.

Have that same lift with a 1/2” body lift as well.

 

[br.jonathan]

My A51 Badsas on Maxxis Trepador 37x12.50 17
Broncbuster
1.5 perch collar kit
1.5 body lift

RC steelies
1/4 completed JKS max clearance kit (plastic removal)

 

[JP05]

Heres a few after pics from my 2 door with 1.5” body lift

Heres a few after pics from my 2 door with 1.5” body lift

That thing looks great!! Been considering doing this to my 4dr Wildtrak.
Are your rocksliders body or frame mounted?

 

[Copperhorse73]

That thing looks great!! Been considering doing this to my 4dr Wildtrak.
Are your rocksliders body or frame mounted?

They are body mounted. I dont think frame mounted goes well with a body lift. FYI I’ve since replaced that Bronco with a Wildtrak, and done the 1.5” body lift with Havoc body mounted sliders, take a look.

Sponsored