- Joined
- Jul 14, 2020
- Threads
- 124
- Messages
- 6,143
- Reaction score
- 7,012
- Location
- California
- Vehicle(s)
- Jeep Wrangler JKUR
- Your Bronco Model
- Wildtrak
So the plug would not require any splicing of wires, but would it require you to drill a hole? I hate adding another $600 because this stuff is adding up quick, but until a can get a rear bumper with an integrated hitch.. not sure what else I can do.Curt has a Plug & Play 7 Pin Wiring Harness for the 2020 Ranger, so they will develop one for the Bronco: https://www.curtmfg.com/part/56431
So all of the Cut/Splice comments are .... well... unfounded. With a Plug & Play Harness, you'll just unplug a tail light from the main harness and plug in the aftermarket harness, route the wires and mount the trailer connector.
I didn't look, but there should also be Trailer Brake Controllers that will be Plug & Play as well.
The almost $600 for what FoMoCo is providing is a Total Joke in My Opinion.
Sponsored