- Joined
- Feb 16, 2023
- Threads
- 4
- Messages
- 191
- Reaction score
- 138
- Location
- Los Angeles
- Vehicle(s)
- Tesla
- Your Bronco Model
- Wildtrak
Is it expecting a ground in the fog harness? I have two lamps so I was planning on taking just both the white led wires, making a Dorman pigtail with the two white led cables and other end is the male molex, So two led lights to the molex with no ground on each side. The ground cable for the lamps run up to a y connector and is grounded to negative terminal at the battery. I just want to make sure that the fog harness isnāt expecting a ground in the molex in order for it to work, itās ground but just not at that location.On my December 23 Badlands Lux Mod bumper there are harnesses under the tow hooks on both the passenger and the driver side.
The factory connector is a Molex - the part number is etched on the female connector. The male connectors are already there as plugs. Best to use the factory male connectors and add pins to them. I depinned the pigtails out of some other connectors I read about on this forum that were "supposed" to work but did not fit correctly.
On the passenger side, there's a yellow wire and a black (ground) wire. On the driver side, there's a brown wire and a black (ground) wire. The wires have a colored stripe in them, but those are the basic colors.
Sponsored