BuiltRight Industries

Wildtrak
Active Member
Squatch Sponsor (Level 3)
First Name
Matt
Joined
Jul 8, 2020
Messages
26
Reaction score
389
Location
CT
Website
www.builtrightind.com
Vehicle(s)
2018 Raptor, 2020 Gladiator, 2020 Tacoma
Bronco
Wildtrak
After a handful of revisions and testing with a few members of the group, BuiltRight Industries has a finished product for both bumpers that we're really happy with. Both will save your Bronco from the dreaded dealer-drilled holes and will locate your front plate in a less obtrusive spot with plenty of adjustability to retain function of tow hooks, accessories, etc.

We were planning to do a group buy but decided that to keep things simple and offer a discounted pre-order to the group. Orders placed today will ship in late October or early November. This price will expire when we sell out the first production run.

Made in the USA and carry a Lifetime 'no-bs' Warranty, like all BuiltRight products.

Pricing and additional information below:

License Plate Relocation Kit | Ford Bronco (2021+) - Modular Bumper
License Plate Relocation Kit | Ford Bronco (2021+) - Plastic Bumper

NOTE: Please note that this was designed and tested using a bumper without parking sensors. Your choice of location when installing may limit the functionality of the parking sensors. We've worked hard to accommodate as much as possible but please be sure to check our product photos for possible mounting locations to determine whether or not the mount will block any other accessories that you intend to use.

106102_Bronco_LPRK_Plastic_summary.jpg


106102_Bronco_LPRK_Modular_summary.jpg


106101_Bronco_LPRK_Standard_9.jpg


2021 Bronco Builtright License Plate Relocation Kits for plastic and steel bumpers 1.jpg
Advertisement

 

Ponyride302

Black Diamond
Well-Known Member
First Name
John
Joined
Aug 4, 2020
Messages
336
Reaction score
611
Location
Central Virginia
Vehicle(s)
04 F-350 CC dually, 97 Infiniti QX4, 21 Bronco BD
Bronco
Black Diamond
I like this much better than the tow hook mount.
 

U725Bronco

First Edition
Well-Known Member
Joined
Jul 14, 2020
Messages
181
Reaction score
202
Location
NorCal
Vehicle(s)
2021 Bronco
Bronco
First Edition
Clubs
 
Looks good! I saw the disclaimer about the parking sensors. Can anyone confirm if this will work on a First Edition or will it block a sensor(s)?
 

Kuze

Wildtrak
Well-Known Member
First Name
Ali
Joined
Jul 22, 2020
Messages
149
Reaction score
287
Location
USA
Vehicle(s)
G63
Bronco
Wildtrak
Clubs
 
NOTE: Please note that this was designed and tested using a bumper without parking sensors. Your choice of location when installing may limit the functionality of the parking sensors. We've worked hard to accommodate as much as possible but please be sure to check our product photos for possible mounting locations to determine whether or not the mount will block any other accessories that you intend to use.
Why not make the 2-hole solution configurable so you can lower the bracket a little bit to not have to cover one of the bumper sensors? I don't feel like this is a solution unless you want to continuously hear your bumper sensors going off because the bracket/license plate is directly in front of it.
 

edgeflyer

Badlands
Well-Known Member
First Name
Brian
Joined
Jul 17, 2020
Messages
1,247
Reaction score
3,125
Location
Texas
Vehicle(s)
2013 FX4
Bronco
Badlands
We have a winner here.
 

edgeflyer

Badlands
Well-Known Member
First Name
Brian
Joined
Jul 17, 2020
Messages
1,247
Reaction score
3,125
Location
Texas
Vehicle(s)
2013 FX4
Bronco
Badlands
What's the specs on that beauty. Wheels, offset, lift?
 

Idaho-Bronco

Badlands
Active Member
First Name
Hank
Joined
Oct 24, 2020
Messages
38
Reaction score
119
Location
Idaho
Vehicle(s)
2005 GMC Sierra 1500
Bronco
Badlands
Clubs
 
Looks great, ordered for modular steel.
 
OP
OP
BuiltRight Industries

BuiltRight Industries

Wildtrak
Active Member
Squatch Sponsor (Level 3)
First Name
Matt
Joined
Jul 8, 2020
Messages
26
Reaction score
389
Location
CT
Website
www.builtrightind.com
Vehicle(s)
2018 Raptor, 2020 Gladiator, 2020 Tacoma
Bronco
Wildtrak
Why not make the 2-hole solution configurable so you can lower the bracket a little bit to not have to cover one of the bumper sensors? I don't feel like this is a solution unless you want to continuously hear your bumper sensors going off because the bracket/license plate is directly in front of it.
On the modular bumper or the plastic bumper? You can see in the renderings that the bracket can be dropped down another row of slots to lower the plate. We're also considering adding a third row of slots to the plate-holding bracket if it's determined that they would aid in avoiding ADAS issues. That being said, to keep price and complexity down, we prioritized fitments and location preferences that we believe will be most prevalent. If we find that we missed the mark on that, we will very happily revise or introduce a different product. Appreciate the feedback!

Matt
 
OP
OP
BuiltRight Industries

BuiltRight Industries

Wildtrak
Active Member
Squatch Sponsor (Level 3)
First Name
Matt
Joined
Jul 8, 2020
Messages
26
Reaction score
389
Location
CT
Website
www.builtrightind.com
Vehicle(s)
2018 Raptor, 2020 Gladiator, 2020 Tacoma
Bronco
Wildtrak
Looks great, ordered for modular steel.
Awesome, thanks!
What's the specs on that beauty. Wheels, offset, lift?
Fifteen52 Traverse HD, 17x8.5 et0, 37x12.5r17 Toyos, 4wp level lift (soon to be replaced with King setup). Crash bars removed and a bit of trimming to the crash bar receiver.
We have a winner here.
Thank you! We got enough input from other current owners that we're very happy with where we landed.

Matt
 
Advertisement

 
fifteen52
Advertisement
Top