- Thread starter
- #1
Hey all wanted to share a few mods I've been working on.
Update
----------
9) Ford Procal 2.7 Tune -- A little boost into it
8)Midland MXT575 install with ghost antenna, rear pod delete with flat speakers, UTV storage bag on roll bar - details in thread.
7) Goose gear rear single rear seat delete with imported drawer! - details in thread.
6 ) Got the Milwaukee packout mount installed - Easy install, just screwed the large baseplate milwaukee sells to my simple wood platform. Not super sleek, but functional and easy to remove when i don't need it.
To lug all the stuff around i'm use the packout cart. It all clips together so no need for straps.
7) I also installed the shock skids from Barnes 4wd. Easy install, good price, quick shipping and good fitment.
8) I got the detachable rockworx mudflaps for the fronts but tbh not very happy with them. The thumb screws they provide rubbed and broke off at the store backing out. Maybe I didn't push the bracket in far enough? they send permanent hardware for it, but ... makes it a bit of a paint to remove when hitting trails.
----------
1) IAG Steps - Easy install
Wish I got the version B which is a bit lower. But this will do.
https://www.iagperformance.com/iag-v1-ez-step-for-2021-ford-bronco-2-door-4-door/
2)Tailgate table - Easy Install no drill-
Doug the owner makes a solid product and gives great service. After seeing another forum member with the tiger wood table I gave him a call and he was able to get me the last one he has available.
https://outbackadventureproducts.com/product/bronco-trailgater-for-2021-22-ford-bronco/
3)Builtright Molly panel - Easy install
Plan on putting the milwaukee packout adapters they sell.
https://builtrightind.com/products/molle-compatible-cargo-panel-full-kit-ford-bronco-2dr-2021
4) Cargo Leveling Platform - Easy Install
I looked a lot of forum members builds for ideas. I didn't want to remove the back seats or lose the storage compartment underneath, but wanted to level the back. The wood piece thats there now will change to something nicer. I'll try to do some sort of laser etching on it.
I sat on it and it holds my weight. Plan on putting a packout mounting platform on it but still looking for sleeker solutions.
5) Whelen Arges Profocus Remote Spotlight with spot and flood light - Medium difficulty
This is one of my favorite mods. Might be a bit cheesy for some of you but I love it. Thanks to @chtucker for the tip on lighting options.
Mounting was a bit of a pain and I'm still working on an optimal solution, but she is all hooked up and working with a not so terrible mounting solution on the DV8 platform. If anyone with some metal fab skills wants to help me out in the LA area, would appreciate it. I have a few ideas to make this a bit sleeker.
Wiring was pretty easy. I hooked up both the controller and light to AUX switch 1 for now.
And here it is in action.
Update
----------
9) Ford Procal 2.7 Tune -- A little boost into it
8)Midland MXT575 install with ghost antenna, rear pod delete with flat speakers, UTV storage bag on roll bar - details in thread.
7) Goose gear rear single rear seat delete with imported drawer! - details in thread.
6 ) Got the Milwaukee packout mount installed - Easy install, just screwed the large baseplate milwaukee sells to my simple wood platform. Not super sleek, but functional and easy to remove when i don't need it.
To lug all the stuff around i'm use the packout cart. It all clips together so no need for straps.
7) I also installed the shock skids from Barnes 4wd. Easy install, good price, quick shipping and good fitment.
8) I got the detachable rockworx mudflaps for the fronts but tbh not very happy with them. The thumb screws they provide rubbed and broke off at the store backing out. Maybe I didn't push the bracket in far enough? they send permanent hardware for it, but ... makes it a bit of a paint to remove when hitting trails.
----------
1) IAG Steps - Easy install
Wish I got the version B which is a bit lower. But this will do.
https://www.iagperformance.com/iag-v1-ez-step-for-2021-ford-bronco-2-door-4-door/
2)Tailgate table - Easy Install no drill-
Doug the owner makes a solid product and gives great service. After seeing another forum member with the tiger wood table I gave him a call and he was able to get me the last one he has available.
https://outbackadventureproducts.com/product/bronco-trailgater-for-2021-22-ford-bronco/
3)Builtright Molly panel - Easy install
Plan on putting the milwaukee packout adapters they sell.
https://builtrightind.com/products/molle-compatible-cargo-panel-full-kit-ford-bronco-2dr-2021
4) Cargo Leveling Platform - Easy Install
I looked a lot of forum members builds for ideas. I didn't want to remove the back seats or lose the storage compartment underneath, but wanted to level the back. The wood piece thats there now will change to something nicer. I'll try to do some sort of laser etching on it.
I sat on it and it holds my weight. Plan on putting a packout mounting platform on it but still looking for sleeker solutions.
5) Whelen Arges Profocus Remote Spotlight with spot and flood light - Medium difficulty
This is one of my favorite mods. Might be a bit cheesy for some of you but I love it. Thanks to @chtucker for the tip on lighting options.
Mounting was a bit of a pain and I'm still working on an optimal solution, but she is all hooked up and working with a not so terrible mounting solution on the DV8 platform. If anyone with some metal fab skills wants to help me out in the LA area, would appreciate it. I have a few ideas to make this a bit sleeker.
Wiring was pretty easy. I hooked up both the controller and light to AUX switch 1 for now.
And here it is in action.
Sponsored
Last edited: