Thoughts on Body Lifts with the broncos IFS

[Snacktime]

Well after this weekend I will say my 1/2" body lift saved me from body damage when I dented my rear bumper. Bumper slots are to sloppy and you can push the bumper into the rear sheet metal if your not careful.

Sponsored

 

[MWILD]

ebay

Can you link the ones you got?

 

[Mudlight]

Can you link the ones you got?

https://www.ebay.com/itm/333121395772?var=542145150571

 

[1979]

If ISUZU did 37 successfully back in 1999 why can't Ford get it right .

I can't tell if you're serious or not

 

[Arokcrwlr]

Just ordered some 1” pucks off ebay. Also longer bolts for the front. Going to try and reuse the factory bolts in the rear. If too short, guess I’ll be buying some M14’s and re-threading.

Did you get the 1" BL installed with the factory bolts?

 

[Bentpushrod]

I never received the pucks. Have a claim in with eBay. I ordered some umhw rod, and am going to make my own pucks. I’ll let you know how that turns out once I get the rod

 

[Mudlight]

I never received the pucks. Have a claim in with eBay. I ordered some umhw rod, and am going to make my own pucks. I’ll let you know how that turns out once I get the rod

Who did you order your pucks through?

 

[Bentpushrod]

Who did you order your pucks through?

https://www.ebay.com/itm/333121395772?var=542145150571

the seller did mail them, although it took 5 days after I bought them before he sent them. Once it hit USPS is when the real trouble began. They were supposed to be delivered November 9th. Still showing in their system, with no date of delivery. I sent a message to the seller, he never responded.

 

[Mudlight]

Gotcha. He is normally pretty good with responding. Try texting him 256-226-1231

 

[Bentpushrod]

Got my body lift done tonight. Ended up making my own pucks. Turned out at 1 1/8”. Factory bolts are definitely not long enough. I got some 14 mm bolts, had to cut them down, and tap them to 13 mm.

I‘m running 37x12.5x17 Yokohama Geolandar’s, with no lift, except now the 1 1/8 body lift. I definitely needed it, as I was rubbing the front of my DV8 rear fender liners on compression. Planning on some Eibach coil overs in the future to give me another inch. Then I should be good to go.

 

[Mudlight]

Got my body lift done tonight. Ended up making my own pucks. Turned out at 1 1/8”. Factory bolts are definitely not long enough. I got some 14 mm bolts, had to cut them down, and tap them to 13 mm.

I‘m running 37x12.5x17 Yokohama Geolandar’s, with no lift, except now the 1 1/8 body lift. I definitely needed it, as I was rubbing the front of my DV8 rear fender liners on compression. Planning on some Eibach coil overs in the future to give me another inch. Then I should be good to go.

That Looks Killer!

 

[Arokcrwlr]

Looks great! Where did you source the umhw? What diameter are the pucks?
TIA

 

[Bentpushrod]

Looks great! Where did you source the umhw? What diameter are the pucks?
TIA

Looks great! Where did you source the umhw? What diameter are the pucks?
TIA

Got the umhw on eBay, 2.5” diameter.

 

[Bird Dog Off Road]

Got my body lift done tonight. Ended up making my own pucks. Turned out at 1 1/8”. Factory bolts are definitely not long enough. I got some 14 mm bolts, had to cut them down, and tap them to 13 mm.

I‘m running 37x12.5x17 Yokohama Geolandar’s, with no lift, except now the 1 1/8 body lift. I definitely needed it, as I was rubbing the front of my DV8 rear fender liners on compression. Planning on some Eibach coil overs in the future to give me another inch. Then I should be good to go.

Do you have wheel spacers? Interested that you'd still have rub with those DV8 fender liners since their selling point is being able to run 37s with them.

 

[Bentpushrod]

No, not running wheel spacers.

Sponsored