TrailRax Modular Roof Rack For Your Bronco

[dvdmnhn]

Hello,

Thanks for asking about this! Our rack is capable of a 270 awning bracket. We are working on a specific HD bracket that is good for a 270 of all kinds. That should be available in Q1 of 23. the brackets that are coming out next week will be for straight pull awnings and accessories.

Will it be a quick disconnect type of bracket for a straight pull awning?

Sponsored

 

[DangerMTBBronco]

Has anyone placed a GFC RTT on their TRMR roof rack? If so, do I need to order any extra T nuts or any bolts?

I highly suggest ordering the RTT mounts from Wheel Every Weekend. They far surpass any other option for RTT mounting. https://www.wheeleveryweekend.com/products/rtt-security-mounts

 

[TrailRax]

Will it be a quick disconnect type of bracket for a straight pull awning?

Yes. It will unbolt from the rack very easily.

 

[dvdmnhn]

Yes. It will unbolt from the rack very easily.

Can’t wait!

 

[FellowM3]

@TrailRax When you guys say "overall height added to your Bronco- 3.9" from the center of the hardtop or 3.3"" , this essentially means my clearance will be 3.3" higher now correct (than the mfr'd claimed height)

 

[TrailRax]

@TrailRax When you guys say "overall height added to your Bronco- 3.9" from the center of the hardtop or 3.3"" , this essentially means my clearance will be 3.3" higher now correct (than the mfr'd claimed height)

So it depends on where you measure. If you are measuring from the tall humps on the side of the hardtop, it is 3.3” if you measure at the exact center of the hardtop (side to side) it is 3.9”. Hope this helps. And yes adds to factory, but keep in mind suspension and tire pressure does affect the actual height as well.

 

[FellowM3]

So it depends on where you measure. If you are measuring from the tall humps on the side of the hardtop, it is 3.3” if you measure at the exact center of the hardtop (side to side) it is 3.9”. Hope this helps. And yes adds to factory, but keep in mind suspension and tire pressure does affect the actual height as well.

Thanks. On my Raptor spec sheet shows height as 77.8 inches, which I'm assuming is the height point (aka the tall humps).

So with the rack Height should be 81.1"

So should fit in 7'0" parking garages (with no cargo)

Any news on the black friday sale yet? If the rack is not in stock, will be still be able to order and wait but take advantage of the sale?

 

[TrailRax]

Thanks. On my Raptor spec sheet shows height as 77.8 inches, which I'm assuming is the height point (aka the tall humps).

So with the rack Height should be 81.1"

So should fit in 7'0" parking garages (with no cargo)

Any news on the black friday sale yet? If the rack is not in stock, will be still be able to order and wait but take advantage of the sale?

Today at 10 AM. We are launching a moving sale!

 

[ironmike]

Thanks. On my Raptor spec sheet shows height as 77.8 inches, which I'm assuming is the height point (aka the tall humps).

So with the rack Height should be 81.1"

So should fit in 7'0" parking garages (with no cargo)

Any news on the black friday sale yet? If the rack is not in stock, will be still be able to order and wait but take advantage of the sale?

Is it "confirmed" that the TRMR w/PakRax will fit the BRaptor?

 

[FellowM3]

Is it "confirmed" that the TRMR w/PakRax will fit the BRaptor?

Good question

Same exact roof however, so I dont see why not

 

[ironmike]

Good question

Same exact roof however, so I dont see why not

When I talked to them at Overland Expo, they were confident, but not certain. @TrailRax
is this confirmed now? I'd prefer not to drop $2K if the fitment for the BRaptor isn't locked in...

 

[FellowM3]

Weirdly black friday sale is up, but is only for the pax trax and now the roof rack or as a whole.

Hoping theyre still uploading the website.

 

[TrailRax]

When I talked to them at Overland Expo, they were confident, but not certain. @TrailRax
is this confirmed now? I'd prefer not to drop $2K if the fitment for the BRaptor isn't locked in...

It fits with no issue. We have CAD files of the Bro co Raptor from Ford.

 

[dvdmnhn]

@TrailRax do you have any installed photos of the awning mounts with awning?

 

[ironmike]

Today at 10 AM. We are launching a moving sale!

Order placed for a 4dr TRMR w/PakRax. Thanks @TrailRax! Can't wait to get these on my new Raptor!

Sponsored