You can adjust where the bracket sits, the holes are slotted. Mine are straight...Not sure if I did something wrong....They are crooked from the side view. Not happy at all right now.
Sponsored
You can adjust where the bracket sits, the holes are slotted. Mine are straight...Not sure if I did something wrong....They are crooked from the side view. Not happy at all right now.
Mine are at the limit of adjustment allowed by the slotted holes. I fiddled with them for a while.You can adjust where the bracket sits, the holes are slotted. Mine are straight...
I just went out and bought a handful of M16x25mm Button Heads. Now I don't worry about those knobs. An allan key just lives in my console just in case I do want them off. Takes 1 minute.More pics because I cleaned the car. Very happy with them.
Rears are adjustable side to side. I have mine pushed all the way in.
I also asked Rokblokz about a permanent mounting solution over the thumb screws and they are sending me a kit. I will update with what that looks like once it arrives.
Have you reached out to RokBlokz customer support? I'd start there.Not sure if I did something wrong....They are crooked from the side view. Not happy at all right now.
Same issue on mine.Not sure if I did something wrong....They are crooked from the side view. Not happy at all right now.
You can adjust where the bracket sits, the holes are slotted. Mine are straight...
Mine are maxed out. The nut clip appears to be hitting the fastener on the wheel well liner, but the angle on the slots is also maxed out. On mine the passenger side flare about 1/4" farther out than the driver side, which I prefer. RokBlokz may need to redesign the front bracket for a better fit.Mine are at the limit of adjustment allowed by the slotted holes. I fiddled with them for a while.
Thanks for the heads up on the second issue you described. Does this appear to be the same issue posted about above earlier today by @Hitemstiff and @AK SNO RIDER?Update:
- I still have this issue: following Rokblokz instructions to sit the bracket right against the wheel well, the metal clip threads protrude in a way that eat into the wheel well liner. Then putting the hand screws makes it even worst cause they are too long and go past the metal clips. I used spacers for that. If you don’t sit the bracket against the wheel well, then the flap won’t sit against the fender flare properly creating other issues (less clearance for the tire, rattle, etc).
Yea, that's what prevents the front flaps from sitting square with the vehicle. It's a design issue, not an install issue. A shame because I'm a big fan of RBs flaps.Thanks for the heads up on the second issue you described. Does this appear to be the same issue posted about above earlier today by @Hitemstiff and @AK SNO RIDER?
That's a bit of a bummer to hear that. I really like Rokblokz's concept but wondering if maybe they rushed it to market. I received mine but held off putting them on when the SAS clip issue arose. Rokblokz was quick to send replacement clips, which was awesome. I've had them sitting in the garage still unopened and now this fitment issue. It's definitely disappointing, especially considering the price point, but hopefully Rokblokz will have a quick and easy solution to this new issue. I will admit I have had some moments wondering why I didn't order the RekGen flaps since they seem to fit well (although removal on the fly would be a PITA). It seems we are all alpha and beta testers on these flaps.Yea, that's what prevents the front flaps from sitting square with the vehicle. It's a design issue, not an install issue. A shame because I'm a big fan of RBs flaps.
Mine installed fine, they do sit at a bit of an angle, but I don’t think it detracts…better aerodynamics! lolUpdate:
- Rokblokz acknowledged the issue eventually and shipped new clips that fixed the up and down movement of the flap.
- I still have this issue: following Rokblokz instructions to sit the bracket right against the wheel well, the metal clip threads protrude in a way that eat into the wheel well liner. Then putting the hand screws makes it even worst cause they are too long and go past the metal clips. I used spacers for that. If you don’t sit the bracket against the wheel well, then the flap won’t sit against the fender flare properly creating other issues (less clearance for the tire, rattle, etc).
Yes although I don’t mind the angle as much as I mind the fact that those put holes in my wheel wells.Thanks for the heads up on the second issue you described. Does this appear to be the same issue posted about above earlier today by @Hitemstiff and @AK SNO RIDER?