- First Name
- Jared
- Joined
- Jul 14, 2020
- Threads
- 210
- Messages
- 1,262
- Reaction score
- 1,861
- Location
- South Florida
- Website
- www.lethalperformance.com
- Vehicle(s)
- 2020 First Edtion 2.7L / 2020 Shelby GT500 CF
- Your Bronco Model
- Raptor
- Thread starter
- #1
Hey All!
Ford Performance just released their Performance Calibrations for the 2021+ Ford Bronco’s 2.7L Models, as well as 2.3L models! These calibrations have some impressive gains and most importantly, are backed by a 3 Year / 36K Mile Warranty!
While raising the overall performance of the engine, they are also capable of :
Each kit includes the M-12655-F ProCal 4 delivery tool and everything you would need to have it calibrated.
It is CARB Approved (E.O. #: D-431-4) for 2021MY vehicles, but 49-state approved with 2022MY vehicles.
As mentioned, the kit is eligible for a 3 year/36k mile warranty from new vehicle in-service when installed by a Ford dealer or ASE/Red Seal certified technician .
Of course, with this calibration, Premium fuel is required!
If you have any questions, feel free to reach out with any of us here at Lethal Performance!
*** UPDATE ***
You can now :
- Change axle/FDU ratio up to 5.38 !
- Upgrade the M190 to the M210 front drive unit by reconfiguring DLCM module
With the allowance of calibration up to a 5.38 gear ratio and up to a 37" BFG 37x12.5R17 KO2 (579 revolutions per mile, this allows for more flexibility when correcting speedometers.
With the addition of reconfiguring for different drive unit, Base models can now upgrade to the front differential with a locker (M210) and unlock full usability without computer fault.
We're excited to see what comes next from Ford Performance on these!
Ford Performance just released their Performance Calibrations for the 2021+ Ford Bronco’s 2.7L Models, as well as 2.3L models! These calibrations have some impressive gains and most importantly, are backed by a 3 Year / 36K Mile Warranty!
While raising the overall performance of the engine, they are also capable of :
- 433 lb.ft. TQ at 3,500 RPM (2.7L)
- 355 HP at 5,500 RPM (2.7L)
- Changing the tire size up to 37" (Updated)
- Changing the axle ratio up to 5.38. (Updated)
- Optimizing transmission shift schedule .
- Improving throttle response throughout entire RPM range.
Each kit includes the M-12655-F ProCal 4 delivery tool and everything you would need to have it calibrated.
It is CARB Approved (E.O. #: D-431-4) for 2021MY vehicles, but 49-state approved with 2022MY vehicles.
As mentioned, the kit is eligible for a 3 year/36k mile warranty from new vehicle in-service when installed by a Ford dealer or ASE/Red Seal certified technician .
Of course, with this calibration, Premium fuel is required!
If you have any questions, feel free to reach out with any of us here at Lethal Performance!
*** UPDATE ***
You can now :
- Change axle/FDU ratio up to 5.38 !
- Upgrade the M190 to the M210 front drive unit by reconfiguring DLCM module
With the allowance of calibration up to a 5.38 gear ratio and up to a 37" BFG 37x12.5R17 KO2 (579 revolutions per mile, this allows for more flexibility when correcting speedometers.
With the addition of reconfiguring for different drive unit, Base models can now upgrade to the front differential with a locker (M210) and unlock full usability without computer fault.
We're excited to see what comes next from Ford Performance on these!
Sponsored
Last edited: