- Thread starter
- #1
Has anyone installed the IAG Interior light kit in their ride yet. It looks like it would help the lighting issue but installation looks like a pain in the butt! Curious if anyone has it yet.
Sponsored
Yes and well worth it. The only real pain point, literally, is splicing into the factory harness. Other than that it’s pretty straightforward. Took me about an hourHas anyone installed the IAG Interior light kit in their ride yet. It looks like it would help the lighting issue but installation looks like a pain in the butt! Curious if anyone has it yet.
Thats not as bad as I would expect. You do think its worth it though? I just might have to do it!Yes and well worth it. The only real pain point, literally, is splicing into the factory harness. Other than that it’s pretty straightforward. Took me about an hour
Thank you. I will look into that. I watched a video on the install if the IAG and it looked like quite a bitnof work.I have the Mabett dome light and the IAG lights. Huge difference. But IAG did take a lot more time than I thought It would take Dome lights take 5 minutes if you Want to start there.
No. They’re mostly a sealed unit. I would expect adding filter, paint or vinyl to the lens would be easier.Not to hijack the thread, but does it seem like the light cover will come off easily? I would like to replace the LEDs with red to attract less bugs while doorless and camping. I spoke briefly with IAG and they said there's just not a market for it.
The install is simple.Has anyone installed the IAG Interior light kit in their ride yet. It looks like it would help the lighting issue but installation looks like a pain in the butt! Curious if anyone has it yet.
See, this is why I come here. Here I am, vastly overthinking bronco things, and bam. A quick and easy solution.No. They’re mostly a sealed unit. I would expect adding filter, paint or vinyl to the lens would be easier.
Are you tapped into wire harness? Or aux switch? Or both? Wondering if you have a bad +dc connection. I’d run a jumper from battery to the light harness.Wondering if anyone ran into the issue I had on my install. The lights come on but are very, very dim and don’t give off any extra light. I’ve tried everything I can think of. Grounded in different positions, retapped the wire several times. Etc. IAG was very helpful in trying to troubleshoot but I’m at a dead end now.