I prefer the KR/4X4 LED mount. Under the hood out of the way. Close to power source. No OEM changes. Easy install. Both wires and filters are always accessible. I've had mine for almost 2 years with no problems. Works great.
Sponsored
The snorkel will get in the way I believeANy thoughts if this will get in the way of a snorkel? Has anyone does this with a snorkel?
We have a new harness/pigtail for the switches. No need to run a power line for the switch anymore. Plugs into the back of the switch and into the compressor. That's it, nice and easy. It's something we started including about 1-2 weeks agoI have the 4x4 Truck LED ARB Mount. It's easy to install and is Very study.
Oh, and I access the Shock Nut that needs to be loosened from the Passenger Side Front Wheel well. It's right there! You don't need an extension to go down through the side of the Engine.
Pictured below is all the wiring that is needed for a Very clean install. I like the Switch mounted close to the Compressor as well. This way you do not have to use an AUX switch inside.
The Purple and Black wires with Plug are from the ARB Harness that comes with the Compressor. You only need about maybe 1 1/2 - 2 feet of it. I added an additional Red wire to the Main Power Harness that goes to the Fuse box via Fuse Tap. Cut to length and terminate and these 3 wires plug into the switch.
We have a new harness/pigtail for the switches. No need to run a power line for the switch anymore. Plugs into the back of the switch and into the compressor. That's it, nice and easy. It's something we started including about 1-2 weeks ago
Staun makes the best tire deflators. I've had my same set 17-18 years nowAs far as accessories go, what are most using for hoses, I like the Staun brass fittings idea for air down. If they're accurate, looks like could be done pretty quick. As far as airing up if you got the time, one hose okay. If you want to get on the road quicker a four- banger set up would be nice. But which one of those works the best and takes up the least amount of space?
Will these mounts work with the Everglades snorkel?Our patent pending KR Off-Road Mount is the easiest mount to use. We were the first to come out with an air compressor mount for the Broncos and put it under the engine bay. This leaves it out of the way and when you are airing back up, you don't bother passengers inside. We actually make our mount from stainless steel (everybody else uses cheaper steel) and powder coat it black. So it'll last the life of your truck. It's also made right here on Long Island (New York) so in the good ole USA!
It uses factory bolt points so you don't have to relocate anything and as I said, it installs easily. It'll support an ARB Single or Twin Compressor.
ARB Air Compressors are built to withstand a lot of abuse. They were designed in Australia where ARB is from, and those guys KNOW wheeling better then anybody, especially with their terrain. So these things work great in the engine bay. We also keep the air compressor at the very top so it doesn't get as hot as say the Jeep JK mounts (which mount them near the manifold which gets VERY hot, but still works).
We offer a complete kit and if you use coupon code BRONCO6G you'll save 10% on the entire kit.
https://www.4x4truckleds.com/kr-off-road-air-compressor-engine-bay-kit-for-2021-ford-bronco/
Check out the installation video here. Pretty easy to install. Justin used a different switch panel since he didn't realize we make a switch panel (and he doesn't have upfitters). But if you have the upfitters you don't need to worry about the switch. And if you don't have upfitters, we make a VERY easy to install switch kit (plugs right into the air compressor):
no the snorkel will get in the way i believeWill these mounts work with the Everglades snorkel?
Will these mounts work with the Everglades snorkel?
Check out our Air compressor mount!
https://dv8offroad.com/collections/.../products/bronco-air-compressor-mount-storage
As far as I know, no one is. In cabin or behind spare are the only options.Is anyone working on an under the hood mount for the Bronco Raptor? I like the spare tire mount if there’s no other option but would prefer to install a compressor under the hood. Thanks.