HAVOC EVOC Retro Fender Flares for the Modern Bronco

[HavocOffroad]

The wait is over! EVOC Fender Flares are now shipping for 2-door and 4-door Bronco.

Since its debut in 1966, there has never been a doubt the Ford Bronco was born to run. In keeping with that heritage, HAVOC EVOC Fender Flares offer a bold, retro-style bolt-on appearance for today's Bronco that captures the wild spirit of the original. With 1-inch additional width, the Havoc Offroad EVOC Flares provide the perfect coverage for larger tire and wheel packages with impact-resistant ABS construction that offers protection as tough as any trail. The flares comes out of the box ready to install with a lightly textured matte black exterior accented by bright stainless hardware to deliver that iconic bolt-on look. Optional blackout hardware creates the ideal stealthy tone for those who prefer a more subtle style (pictured on Cyber Orange 4-door below). Want to take your Bronco to another level? With HAVOC's easily paintable finish, you can customize them to blend perfectly with your Bronco's paint scheme resulting in a look that leaves the others in the dust. No matter how you finish them, HAVOC EVOC Fender Flares can give your Bronco the look of a legend.

• Classic retro-styling gives the appearance of a bolt-on flare made popular on ‘60s-era Broncos
• Constructed from durable, impact-resistant ABS thermoplastic
• Attractive lightly textured matte black finish can be painted for a custom look
• Compatible with OE wheel liners and all factory sensors

Shop now at havocoffroad.com.

Sponsored

 

[Canyon Coolers]

Great copy writing.
Is this intended solely for non sasquatch fenders ?
Would this allow more uptravel then the existing sasquatch fenders ?

 

[userdude]

These are 1" wider than stock Sasquatch flares?

 

[Az_Squatch_Bronco]

They look just the Sas fenders I have now excpet wider and...not good on the eye? Nobody makes a good fender unless you go fiberglass.

 

[Bruno]

How about this, but overall width 1"?
Thats your market whitespace - narrow body, narrow flare.
Currently nothing existis between flare delete and a 2"+ flare

 

[2023bronco]

I think these are 1" wider than non-SAS -- not 1" wider than SAS. So somewhere between non-SAS and SAS flares.

On the website they have them on a non-SAS Badlands. If they were wider than SAS flares, they'd look ridiculous on a non-SAS Badlands but they don't.

I actually think they look decent for what they are, and the width is good. But I'm one of those that thinks the SAS flares look like tacked on kiddie pool sides.

 

[pony2bronco]

Ugh finally another retro "bolt" option, but again the wrong one. We need a squared fender like the older gen Broncos (see KBD flares) that has the bolted appearance.

 

[redone17]

Not gonna lie. Kinda like the black hardware version. Is it included?

 

[Dimitar]

Ugh finally another retro "bolt" option, but again the wrong one. We need a squared fender like the older gen Broncos (see KBD flares) that has the bolted appearance.

Yes!

 

[kodiakisland]

We already have the standard flare and the Sasquatch flare. Now we have one in the middle? I would have much rather had a minimal flare, about 1-1.5 inch coverage.

 

[imaginager]

The wait is over! EVOC Fender Flares are now shipping for 2-door and 4-door Bronco.

Can you post some images of the front flare where it connects to the fender in front of the door? For those with rails or running boards, I want to see how much clearance is there. Still need protection for thrown rocks on the side of the bronco, but I'm interested in these flares. Also, yes, black hardware would be a plus.

 

[HavocOffroad]

The EVOC flares will work on Bronco with or without the Sasquatch Package. The flares are 1" narrower than the SAS Flares so they will allow more uptravel, about 1". They are 1" wider than the standard flares.

Black hardware is not included, but we have a kit with just the black hardware (HFB-04-004).

 

[4avor8ntfair]

The EVOC flares will work on Bronco with or without the Sasquatch Package. The flares are 1" narrower than the SAS Flares so they will allow more uptravel, about 1". They are 1" wider than the standard flares.

Black hardware is not included, but we have a kit with just the black hardware (HFB-04-004).

Are they actually bolt-on or similar to the stock quick disconnect?
Is the rear flare for the 4-door 2-pieces?

 

[HavocOffroad]

Are they actually bolt-on or similar to the stock quick disconnect?
Is the rear flare for the 4-door 2-pieces?

The flares are mounted with a mounting bracket, so the flares themselves are not bolted directly to the body. Yes, the rear flares for the 4-door application are two pieces.

You can check out the install video here to answer any other install questions.

 

[Hunger&SharkTooth]

I got the havoc trailcrawler steps and love the

Sponsored