- First Name
- Mahesh
- Joined
- Sep 22, 2020
- Threads
- 13
- Messages
- 156
- Reaction score
- 135
- Location
- Chandler, AZ
- Vehicle(s)
- BMW 335i
- Your Bronco Model
- Black Diamond
- Thread starter
- #1
I participated in the Nevada off-Roadeo this past weekend and what an experience it was!! The staff was amazing, food was amazing, and the location was amazing!! Being new to off-roading I learned a lot about just off-roading in general, but of course learned about the various features of the Bronco. Really really highly recommend going to one if you have not.
So...the quirky feature that the instructor showed us is the "Hill Decent Control" on auto-trans. The Ford manual only lists the option under MT but if you have a Sasquatch 10-speed auto you can access it as well. To get it to is a bit clunky.
Essentially to get to it via the center Bronco button on the GOAT model dial. So, here goes:
So...the quirky feature that the instructor showed us is the "Hill Decent Control" on auto-trans. The Ford manual only lists the option under MT but if you have a Sasquatch 10-speed auto you can access it as well. To get it to is a bit clunky.
Essentially to get to it via the center Bronco button on the GOAT model dial. So, here goes:
- Set your Bronco to either 4H or 4L
- Press the center Bronco button - you will now be on Trail 1-Pedal assist
- Press the Set + button on the left hand side of your steering wheel - you will now be in Trail Control
- Engage the Parking Brake on the lower left of the driver side - LOL!! you are now in Hill Decent Control (you can check this by the grey icon in your dash)
- Release the parking brake - you will still be in Hill Decent Control
Sponsored