- Thread starter
- #31
10 Gauge. I won't draw enough amperage to require 10 gauge, but I prefer to overbuild the infrastructure for the future.what size cable did you use?
Sponsored
10 Gauge. I won't draw enough amperage to require 10 gauge, but I prefer to overbuild the infrastructure for the future.what size cable did you use?
Thanks, do you think there would be enough space for two AWG 6 cables?10 Gauge. I won't draw enough amperage to require 10 gauge, but I prefer to overbuild the infrastructure for the future.
Probably, they'll be stiffer, so more difficult to fish through, but there was quite a bit of room depending on where you put things. I don't see why not!Thanks, do you think there would be enough space for two AWG 6 cables?
Perfect. Thanks you for your helpProbably, they'll be stiffer, so more difficult to fish through, but there was quite a bit of room depending on where you put things. I don't see why not!
Yes!Great write up!
Anyone else think we need a Ham Radio Club page on here?
73s de W5DGV!!!
Have you tried this?Bummer but I did find this which is an exact fit.
Amazon.com: Hooke Road Wrangler JL CB Antenna Spare Tire Mount Bracket Compatible with Jeep Wrangler JL 2018 2019 2020 2021 2022 : Automotive
Do these lip mounts cause and paint damage or marks if were to remove?I'm not sure what the permanent situation will be, but for now, I am working with this a trunk lip mount. I'm leaning toward running the feedline through one of the grommets under the floor, then following the frame to the front and mounting to the hood for long-term.
I have a trip next week and I was tired of using a HT for mobile comms.
Also, I'm going to have to remove this when it goes into the body shop to fix the transit damage, so wanted something temporary.
Yes works perfectlyHave you tried this?
They have rubber backing on the outside part and a metal plate on the inside part, so generally, no, but if you're worried about it, there are other options.Do these lip mounts cause and paint damage or marks if were to remove?
Thanks, curious of what antenna you're using? I take it the hole is for a so-239 passthrough and use something like this https://www.dxengineering.com/parts/dxe-363-sst ?Yes works perfectly
Did you mount this against the body or on the outside of the spare tire mount? I put it on the outside, just removing two bolts and mounting so it's not against the paint, but it pressed against the spare tire like that. Really didn't want it flat against the paint on tailgate. Maybe do the wheel spacer like someone else did on one..Bummer but I did find this which is an exact fit.
Amazon.com: Hooke Road Wrangler JL CB Antenna Spare Tire Mount Bracket Compatible with Jeep Wrangler JL 2018 2019 2020 2021 2022 : Automotive
I vote YESGreat write up!
Anyone else think we need a Ham Radio Club page on here?
73s de W5DGV!!!
Anyone with these running a jumper / bonding from the bracket to the frame?Here’s a link for a trail sight mount.
https://www.trailrax.com/collection...l-sight-accessory-mount?avad=275545_a2b9e61c9