- Thread starter
- #571
Holy Crap, 78,500 views.
Sponsored
BumpHoly Crap, 78,500 views.
There are schematics for the taillight wiring in this thread, but not the brake light switch.Can anyone provide a schematic of the Broncos brake light switch wiring or the color code for the wires? Looking to install an led in the coach to indicate when the brake pedal is in use.
Here's the schematic.Can anyone provide a schematic of the Broncos brake light switch wiring or the color code for the wires? Looking to install an led in the coach to indicate when the brake pedal is in use.
did you actually locate the switch? I pulled the panel below the steering column and still couldn’t find it.There are schematics for the taillight wiring in this thread, but not the brake light switch.
FWIW, I attempted to tap into the brake light switch for the same purpose (and to install a relay to prevent the brake/directional conflict), and found the switch impossible to get to, without removing the dashboard.
You may want to tap into the taillights harness instead.
No - I did a lot more disassembly than those bottom panels and braces and could only see it is up higher than the steering column, most likely behind the instrument cluster. I gave up looking for it after a few hours of ripping things apart.did you actually locate the switch? I pulled the panel below the steering column and still couldn’t find it.
Thanks Grant. Now to find the switch.Here's the schematic.
Note about the brake lights themselves : They do not stay active, they go to sleep when the Electronic Brake Boost shuts down.
At least I have t lost my mind. Searching all under the dash. Certainly not in any obvious location. Running a wire from the brake light is sounding Mitch easier at the moment.No - I did a lot more disassembly than those bottom panels and braces and could only see it is up higher than the steering column, most likely behind the instrument cluster. I gave up looking for it after a few hours of ripping things apart.
And accidentally added pictures of my snowmobile and trailerGot the first piece needed to flat tow our 22 2 door with 2.3, RVIbrake 3.
Next is shopping for the other items needed, any suggestions on best light set up, also are any of you using the recovery adapters on the OEM modulator bumper?
Brian
I'm running a roadmaster nighthawk with the roadmaster adapters for the recovery points on the OEM HD Modular Bumper. Pulled the Bronco almost 5000 miles over the last year with that setup, no issues.Got the first piece needed to flat tow our 22 2 door with 2.3, RVIbrake 3.
Next is shopping for the other items needed, any suggestions on best light set up, also are any of you using the recovery adapters on the OEM modulator bumper?
Brian
I'm running a roadmaster nighthawk with the roadmaster adapters for the recovery points on the OEM HD Modular Bumper. Pulled the Bronco almost 5000 miles over the last year with that setup, no issues.
Paul