- First Name
- Sam
- Joined
- Jul 2, 2020
- Threads
- 65
- Messages
- 844
- Reaction score
- 3,769
- Location
- Detroit Area
- Vehicle(s)
- sas
- Your Bronco Model
- Black Diamond
- Thread starter
- #1
After falling victim to Webasto's short comings and failing to produce even close to enough hard tops, ford is now failing to provide the aftermarket with the data necessary to help quell these problems.
Below is taken directly from a conversation with Patriot Fastbacks today 6/8/22
"We are making forward progress, Ford has not been the most cooperative with us in obtaining the needed data, so thatās been a bit of a sticking point. However, with our Master mold makers, who have been doing this type of work for decades, data from Ford isnāt completely necessary, it just cuts the time in more than half.
So that being said, weāre looking at more towards the end of the year, hopefully before the cold season hits.
Sorry for the not so good news, but weāre definitely progressing as fast as we can towards some new super badarse tops!!"
Hey @Ford social media person - work your way through your cross functional teams to find the design engineers who hold this data hostage.
Hint* They are located in the PDC building off of Oakwood blvd
Below is taken directly from a conversation with Patriot Fastbacks today 6/8/22
"We are making forward progress, Ford has not been the most cooperative with us in obtaining the needed data, so thatās been a bit of a sticking point. However, with our Master mold makers, who have been doing this type of work for decades, data from Ford isnāt completely necessary, it just cuts the time in more than half.
So that being said, weāre looking at more towards the end of the year, hopefully before the cold season hits.
Sorry for the not so good news, but weāre definitely progressing as fast as we can towards some new super badarse tops!!"
Hey @Ford social media person - work your way through your cross functional teams to find the design engineers who hold this data hostage.
Hint* They are located in the PDC building off of Oakwood blvd
Sponsored