- Thread starter
- #16
I’ll let you know if I end up making something.I would be interested in seeing what you come up with or any one else. Would prefer mounting my lowrance also instead of the iPad I have now.
Sponsored
I’ll let you know if I end up making something.I would be interested in seeing what you come up with or any one else. Would prefer mounting my lowrance also instead of the iPad I have now.
Thanks! I was looking for something that is easily moveable between vehicles and didn't require permanent mods on the dash. I would love to use something like the PCI Race Radios folding mount, but couldn't find enough space in the Bronco to do it.I’m going to check the dash over and see if I can figure a way to make and mount a bracket
These both look to be much more solid options, Thanks!
Used to run a garmin in my gen1. iPhone with Gaia maps and CarPlay is a better setup. You download maps for offline and use your phone gps which doesn’t require signal.
Did you bolt the bracket to the rail or use a ball/arm?I have an Archtype Racing rail in my bronco and stick it on there. I was concerned about it bouncing around when I went down to Baja but it worked like a champ, no problems.
I’ve been using OnX off-road with the offline maps for a while now and I’ve experienced some glitches that left me without navigation. This is the primary reason I’m wanting to install the Lowrance. With the Lowrance it works every time and there are no syncing glitches or necessary map updates to be concerned with.Used to run a garmin in my gen1. iPhone with Gaia maps and CarPlay is a better setup. You download maps for offline and use your phone gps which doesn’t require signal.
Not really. Just need an iPad mini w/ cellular (no need to subscribe, just need the GPS functionality) and LeadNav app, which is better than Lowrance and cheaper. Plus, you can use the iPad mini for other stuff, not so much the Lowrance device.It’s the absolute best option for off-road gps navigation. Download detailed maps with plotted courses. Every off-road race truck uses them.
How is this mounted?Just saw this thread. This pic is on my build thread. HDS 7.
The DV8 bridge, I’ll take some side shots, post them up. Couple of issues, when I put it together. Had to drill out 4 new holes, then the first time, shifter didn’t clear. Bought 4 inch spacers, fits now, no rubbing.How is this mounted?