Mikellis Body Lifts

[HarmCityHammer]

1" body lift has minimal gaps, not even noticeable. Unless someone knows what to look for, I would not waste my time.

my bumper sits very nicely currently tight to the valance, I don’t WANT to lose that if any anyway possible.

Sponsored

 

[Brandon Miller]

Only for the front b/c I have the JKS kit. You can use a 3/4" body lift with the stock bolts accept for the front 2 bolts with the JKS Max Tire clearance kit.

What are the specs on that front bolt? I have the jks kit installed and I have a 1/2 puck set sitting here

 

[Danny's Bronco]

The Boggers are AWESOME! Had those on my truck back in the 90's and replaced them with some MT Baja Claws that were just slightly less awesome but lasted like 10x longer for me!

 

[Mudlight]

What are the specs on that front bolt? I have the jks kit installed and I have a 1/2 puck set sitting here

M12-1.75 x 150mm

 

[Brandon Miller]

M12-1.75 x 150mm

Is a longer bolt required for the 1/2" lift?

 

[Mudlight]

The Boggers are AWESOME! Had those on my truck back in the 90's and replaced them with some MT Baja Claws that were just slightly less awesome but lasted like 10x longer for me!

Thanks. I have ran Boggers for a long time.

 

[SS Bronco]

Is a longer bolt required for the 1/2" lift?

No, a few friends did 3/4” with factory bolts.

 

[Mudlight]

Is a longer bolt required for the 1/2" lift?

You should be fine if it were stock, if running the JKS kit you will need it.

 

[GToddC5]

Not sure after reading - What bolts are needed for a 1" lift?

 

[Mudlight]

Not sure after reading - What bolts are needed for a 1" lift?

Email Mike and he will get you fixed up. mikellisbodylifts.com
@Mikellis Lifts

 

[GToddC5]

Email Mike and he will get you fixed up. mikellisbodylifts.com
@Mikellis Lifts

Cool, thanks!

 

[Brandon Miller]

You should be fine if it were stock, if running the JKS kit you will need it.

Got it, I'll check Fastenal for that bolt today. Thx

 

[Danny's Bronco]

Thanks. I have ran Boggers for a long time.

Love it. We had a 78 on 44's that seemed like a monster truck in in the mid 90's. Now day's they'll put 44's on a lifted flex!

 

[HarmCityHammer]

Damn, the 2” and 1.5” kits are vastly more expensive . That’s a shame.

 

[Bikeric]

Damn, the 2” and 1.5” kits are vastly more expensive . That’s a shame.

You can thank Ford for that. M13x1.75 bolts are about as rare as a $2 bill. M13x1.75 bolts that are 8+" long are as rare as $3 bill's.

Sponsored