what is this BS"
Not available in California for 2022MY vehicles
"" it this trueor just some :legal text....
Not available in California for 2022MY vehicles
"" it this trueor just some :legal text....
Sponsored
It still changes to 4A whenever you go to sport mode. Not terrible having to click 2H after thoughAnyone know if any of the solutions let you have Sport Mode power in 2A (without the kludge of having to shift 4A off)?
You're right, of course. Just a mild irritant.It still changes to 4A whenever you go to sport mode. Not terrible having to click 2H after though
Normal mode shifting is improved, you might not have to make the change anymore. After 37s, I switched to sport each time, after the tune, I typically dont.You're right, of course. Just a mild irritant.
That M190 to 210 swap support is awesome.Hey All!
Ford Performance just released an Update and New Feature for the ProCal4 device for the 2021+ Bronco's, 2.3L and 2.7L!
With the update, you can now :
- Change axle/FDU ratio up to 5.38 !
- Upgrade the M190 to the M210 front drive unit by reconfiguring DLCM module
With the allowance of calibration up to a 5.38 gear ratio and up to a 37" BFG 37x12.5R17 KO2 (579 revolutions per mile, this allows for more flexibility when correcting speedometers.
With the addition of reconfiguring for different drive unit, Base models can now upgrade to the front differential with a locker (M210) and unlock full usability without computer fault.
We're excited to see what comes next from Ford Performance on these!
https://www.bronco6g.com/forum/thre...s-today-lethal-performance.60221/post-1693951
I'm not positive on that one but if you find out you're unable to get one with your points we have more of these inbound which will be ready to ship in the next few days. Let us know if there's anything else we can help you with in the meantime.Can you use Ford Pass Points to buy the Tune?
Yes you can. I did. Get in touch with @flipCan you use Ford Pass Points to buy the Tune?
Thanks, I just sent him a DM.Yes you can. I did. Get in touch with @flip
It appears that the severe duty steering rack upgrade might also be supported now or soon. I already have mine installed and programmed, so I can't confirm what procal3 does with a new uninitialized rack.Hey All!
Ford Performance just released an Update and New Feature for the ProCal4 device for the 2021+ Bronco's, 2.3L and 2.7L!
With the update, you can now :
- Change axle/FDU ratio up to 5.38 !
- Upgrade the M190 to the M210 front drive unit by reconfiguring DLCM module
With the allowance of calibration up to a 5.38 gear ratio and up to a 37" BFG 37x12.5R17 KO2 (579 revolutions per mile, this allows for more flexibility when correcting speedometers.
With the addition of reconfiguring for different drive unit, Base models can now upgrade to the front differential with a locker (M210) and unlock full usability without computer fault.
We're excited to see what comes next from Ford Performance on these!
https://www.bronco6g.com/forum/thre...s-today-lethal-performance.60221/post-1693951
That would be huge too if it's trueIt appears that the severe duty steering rack upgrade might also be supported now or soon. I already have mine installed and programmed, so I can't confirm what procal3 does with a new uninitialized rack.